6-80M Alpha FMJ, complete Multiband portable HF antenna

Starting at: $399.00

Please Choose:





Camouflaged Black Alpha Match




USPS tracking information is always provided

Delivery Signature





Condition

New


Add to Cart:
The Alpha FMJ (Full Metal Jacket) system is a complete multiband 500W PEP SSB multipurpose HF antenna that is pre-tuned and requires no moving clips on coils or readjusting of whips for tuning. You may also use an external antenna tuner if your antenna is installed over a poor ground or not placed in a clear area.

Purpose: When fully deployed with the NVIS element, the Alpha ‘FMJ’ antenna system can be configured to launch your signal at your target in the opposite direction the NVIS element is run. For an omnidirectional signal pattern, you may remove the NVIS element.

Installation Note: Never Remove or Loosen any of the Bolts, Washers, Nuts, or Caps on the Alpha Match.

eHam Reviews:
eHam Reviews

User Guide:
User Guide

Included:
1 - Field bag that holds all of the following:
1 - 6 foot light-weight aluminum tripod
1 - 13 feet 1 1/2 inch .433 OD MilStick whip made from 26 inch section aluminum elements
1 - Alpha Match encased in a FMJ (Full Metal Jacket) 316 Stainless Steel and weather proof housing that shields all internal components from all RFI (Radio Frequency Interference.
1 - 25' NVIS element wire rated at 500 pound tensile strength break point. Rated also from -40 to +75 degrees Celsius, with little or no memory. Plus a green insulator and removable stake on the distal end
1 - QUICK Deployment Riser on Stainless Steel Jaw Mount=No loose hardware
1 - 8' ground wire with ground stake

Specifications:
• Frequency: 6M – 80M
• Power: 500W SSB (200 CW or 100W Digital)
• RF Connection: SO-239

3D Model of the Alpha Antenna® FMJ multiband system




Analysis of the Alpha FMJ multiband antenna when on the tripod

SWR Analysis

Analysis of the Alpha FMJ multiband antenna when on the Jaw Mount at 6'

SWR Analysis

Additional deployment configurations using included or optional components:
• Vehicle (Mobile & Stationary)
• Balcony
• Man-Pack
• Vertical, Horizontal, and Sloper
• Inverted “V” & Inverted “L”
• NVIS

OPTIONAL 'HD-FMJ' (Heavy Duty Full Metal Jacket) Tripod,
which wraps around the antenna system when stored.
* Note - Upgrade to the HD-FMJ Tripod & get the Expedition Bag (plus an elbow adapter),
which replaces the lightweight aluminum tripod and medium field bag.



Advancements:
No changing of switches, jumpers or coils are required for touch free operations.

Directional; Unique also to only to the Alpha Multiband Antenna line of systems is a directional antenna system for international DX communications that also enhances NVIS (Near Vertical Incident Skywave) for stateside communications.

The Alpha Match: Before assembly, the inner wall of the stainless steel housing is lined with a dielectric, then the transformer is placed inside the housing. This is what gives the Alpha Match both the capacitive and inductive balance once the elements are installed. The main difference between legacy designs, which are black and made of either a plastic Delrin or PVC, is that those older designs do not have capacitive characteristics. This is what enables the Alpha Match to balance the entire antenna system once the elements are installed. It is important to note that the Alpha Match housing is made of 316 stainless steel, which has non-magnetic characteristics.

The MilStick Whip; The composite of the .433 inch diameter MilStick whip is a high strength, high quality, aerospace 7075-T9 alloy 13 feet long. The construction of each element has a scratch-resistant hard-anodized surface. This surface is fully removed from each insert and also removed 2.5 inches inside each element. The inserts are then electrically bonded, where full contact RF continuity and connectivity is used to ensure maximum efficiencies are achieved. At the base of the whip an embedded 8740 Steel (chrome moly) cadmium plated stud supports the MilStick on the Alpha Match.

The Wiring Used; Sheathed 13 AWG memory free wiring is used, which has a tensile break strength of 500 pounds that is rated for temperatures from -40°C to +75°C. VS. Wiring that is so light duty that it can be wrapped around a kite string holder.

The Padded Field Bag; Made from 600D nylon with embroidered logo and with high quality zippers. This highly customized bag has a padded front pocket and a padded larger inner compartment, plus a shoulder strap with padded shoulder pad.

Optional Camouflaged Black Alpha Match
Black Match

If you have a suggestion on price or how to improve this product, please send us your feedback by clicking here.

We are dedicated to improving all of our antennas, and because this is such a giant leap forward in technology, there is no upgrade path from previous versions in the case of this system. Specifications and descriptions are subject to change without notice.

Audio Catalog for this item



Languages

English  Español  Japanese  

Who's Online

There currently are 33 guests and 
1 member online.
Your IP Address is: 54.167.216.239
Copyright © 2018 Alpha Antenna. Powered by Zen Cart